index2038006.gif
index2038005.gif
index2002015.gif
the grinding specialists
Return to Product List
IGM Series
Specifications subject to change without notice.
index2003009.gif
index2001006.gif
OKAMOTO
TOYODA
Coolant Systems
Parts
Used Machines
Service
index2001005.gif
Contact Us
index2038004.gif
Financing
index2038003.gif
Home
index2038002.jpg
index2038001.jpg
The following features are standard on the IGM-2MB
MDI Control Stores which stores up to 32 programs
Table Enclosure with Door Interlock System
Frequency Inverter for Workhead

The following features are standard on the IGM-15NC and 15NC2:
FANUC Control
Frequency Inverter for Wheel Spindle
Twin Spindle (IGM-15NC2)
Conversational Programming
Heavily ribbed Meehanite cast iron construction for exceptional rigidity
High performance wheelhead design with three programmable speeds
 
IGM-2MB
    IGM-15NC        IGM-15NC2
CONTROL MDI Control  FANUC  FANUC 
Internal Diameter to be ground 0.24"~8"  0.24"~6"/8"  0.24"~4" 
Maximum Grinding Stroke 8"  5"  3.2" 
Swing over table 24"  24"  24" 
WORKHEAD      
Workhead spindle Speed 50~1,700 rpm  100~850 rpm  100~850 rpm 
Swivel -5~+30 deg  -5~+15 deg  -5~+15 deg 
Maximum Crossfeed 9"  N/A  NA 
WHEELHEAD      
Maximum Crossfeed 1.2"  6.7"  12" 
Stander Grinding Whl Spindles Option  Option  10,000 & 30,000 rpm 
MOTORS      
Wheel Spindle 5hp/2P  3hp/2P 
7hp/2/4P 
Work Spindle 2hp/4P  2hp/4P  2hp/4p 
FLOOR SPACE (LxWxH) 96"x54"x69"  100"x78"x67"  116"x90"x70" 
WEIGHT 6,160 lbs.  5,072 lbs.  5,300 lbs.